Semi-automatic capping machines

Screwcap

Electrically operated bench-top capping machine with stainless steel descending head and 4 rollers to seal smooth aluminium pilferproof caps with or without pourer.
Home / Semi-automatic capping machines / Screwcap
  Home
Beverage
Cosmetic
Food
Chemical
Pharmaceutical

Electric benchtop capper with 4-roller stainless steel descending head suitable for sealing pilferproof smooth aluminum screw caps with or without pourer.

By replacing the screw capping head with a magnetic clutch head and its stainless steel spindle, the same machine can be used to close twist off caps on jars and plastic screw caps.

Through the bimanual control, the operator activates the capping head which descends on the neck of the container to close the twist off cap or seal plastic screw caps on PET containers. Furthermore, the magnetic friction head can be combined with a mechanical gripper for closing dispenser-type caps, pump caps, spray caps, nail polish caps, nasal applicators and many other applications used both in the cosmetic and pharmaceutical fields.

CON TESTA A 4 RULLI.jpg
CON TESTA A FRIZIONE MAGNETICA E MANDRINO MILLERIGHE.jpg
DETTAGLIO TWIST OFF.jpg
DETTAGLIO TESTA A 4 RULLI.jpg
CON TESTA A FRIZIONE MAGNETICA.jpg
DETTAGLIO MANDRINO MILLERIGHE.jpg
DETTAGLIO PINZA A TRE SETTORI.jpg
TESTA A FRIZIONE MAGNETICA E PINZA A 3 SETTORI.jpg
DETTAGLIO TWIST OFF1.jpg
CON TESTA 4 RULLI .jpg
DETTAGLIO TESTA A 4 RULLI (2).jpg
Technical specificationsFaqsConfigurationsCatalog

Technical specifications

Some technical data to know more about Screwcap

Specifications

Production
  • About 500 p/h
Dimensions
  • 450 x 450 x 1200
Weight
  • 60 Kgs
Voltages
  • 230v – 50 hz single-phase
  • 380v – 50 hz three-phase
  • 110/120v – 60 hz single-phase
  • 110/120v – 60 hz single-phase
  • 220v – 60 hz single-phase
  • 480v – 60 hz three-phase
  • 380v – 60 hz three-phase
Minimum bottle height
  • 30 mm
Maximum bottle height
  • 350 mm

Configurations

Available configurations
  • with 4-roller head for threading aluminum caps
  • with 2-roller head for threading aluminum caps
  • with pressure head for closing plastic pressure caps
  • with magnetic clutch and twist off mandrel for closing twisted off caps
  • with mandrel in Knurled stainless steel for closing plastic screw caps
  • with 3-sector gripper for closing dispenser caps
  • caps with applicator

Packaging

Cork
  • low twist off with and without safety button
  • twist off deep with and without safety button
  • pre-threaded plastic caps
  • pre-threaded screw-on aluminium caps
  • smooth plastic caps
  • flip top caps
  • pump caps
  • caps with applicator
  • anti-choking plastic caps (baby caps, wavy caps, baby caps +, brick caps, tethered caps, caps with vaporizer)
  • DIN61 caps with vent
  • screw caps with HDPE gasket
  • screw caps with HDPE gasket
  • aluminium screw caps for oil, wine, spirits
  • aluminium screw caps mignon
  • MCA aluminum caps
  • aluminium screw caps with Saranex gasket
  • aluminium screw caps with EPE gasket
  • Stelvin type aluminum screw caps
  • dispenser cap
  • cap with dropper

FAQs

Do you still have any doubts? Here you will find all the answers you need.

I have just bought the Screwcap capper, I connected it to the electric socket but the head does not turn and the machine does not start. What should I do?

For safety reasons, all Screwcap cappers are packed on a pallet and the protective visor of the capping head is dismantled. Before putting the capper into operation, it is therefore necessary to fit the protective visor of the capping head. This has a microswitch that allows you to start the capping operation once the machine has been connected to the electricity.

The Screwcap capper is new, unfortunately during the node capping operation the head cuts the capsule while the seal is done correctly. What should I do?

If the machine is three-phase, check the direction of rotation of the capping head. In the case of a three-phase motor, check that the head rotates clockwise. Otherwise, two of the three phases on the electrical outlet must be reversed.
The machine is connected, the plexiglass head protection is installed and yet the capper does not work. How come?
It is necessary to verify that the emergency button of the machine is not pressed.
How do I adjust the height of the capping head if I have two bottle formats, but only one cap format?
During the capper purchase procedure, we always request sufficient sampling of caps and bottles to be able to adjust the machinery to the customer's samples. Sending samples of bottles and caps is strongly recommended, especially if you have multiple bottle formats. In fact, when we receive the sampling, we proceed to adjust the capping head and column, according to the dimensions of the bottles and caps received. We insert reference notches on the capping column according to the bottles to be closed. The machine is ready for use and does not need further adjustments and/or modifications.

All available configurations

The machine can be configured on demand to meet all needs

descending head screwdrivers for aluminum capsules PFP

Screwcap, semi-automatic screwer with descending head for pilferproof smooth aluminum caps with or without pourer. Electric operation, available in the single-phase and three-phase version, two-handed control: by pressing the two side buttons, the closing head descends and seals the capsules …

descending head screwdrivers for twist off capsules and plastic screw caps

Screwcap, semi-automatic capping machine with descending head in the version for closing twist off caps or plastic screw caps. Electric-pneumatic operation, available in single-phase and three-phase versions, two-handed operation: by pressing the two side buttons, the closing head descends and …

descending head screwdrivers with three sector collet

Screwcap, semi-automatic capping machine with descending head, electro-pneumatic operation. Machine suitable for screwing plastic screw caps such as dispensers, flip tops and vaporizers. Magnetic hysteresis clutch with adjustable torque. The screwing head with three sectors (normally closed) is pneumatically controlled, …

background image

Talk to a consultant

Need specific information about this machine? Enter your email address to be contacted by a specialized consultant